ThermoCable Linear Heat Detection Literature

ThermoCable Product Literature
Return to: ThermoCable Main Page
	ThermoCable Application Guide ThermoCable Application Guide.pdf

Equipment and Accessory Cut Sheets

ThermoCable Linear Heat Detection Cable
155°F (68°C) - Part Number: TC155
172°F (78°C) - Part Number: TC172
190°F (88°C) - Part Number: TC190
220°F (105°C) - Part Number: TC220

ThermoCable Cut Sheet.pdf

ThermoCable Component Example.pdf


	Distance Locating Module Part Number: APDL-Z1 TC Distance Locator Cut Sheet.pdf

Installation Accessories TC Installation Accessories Cut Sheet.pdf
	Double Loop Cable Tie Part Number: TC1027 Fits 3/4” to 2” sprinkler pipe Black nylon 6.6 rated from -40° to 185°F Double Loop Cable Tie Part Number: TC1028 Fits 2½” to 3½” sprinkler pipe Black nylon 6.6 rated from -40° to 185°F Single Loop Cable Tie Part Number: TC1029 Fits 4” to 6” sprinkler pipe Black nylon 6.6 rated from -40° to 185°F

	Cable Tie Mount Part Number: TC1017 Use with Single Loop Cable Tie TC1018 Nylon 6.6 cable tie mount - Black Must use TC1019 Adhesive to adhere to mounting surface

	Single Loop Cable Tie Part Number: TC1018 For use with cable tie mount TC1017 Black nylon 6.6 rated from -40° to 185°F

	Cable Tie Mount Adhesive Part Number: TC1019 For use with Cable Tie Mount TC1017

	Cable Clip Part Number: TC1012 Nylon 6.6 - Black 3/16” mounting hole

	Cable Clip Part Number: TC1013 Zinc plated steel cable clip 1/4” mounting hole

	Beam Clamp, Spring Steel Part Number: TC1014 Includes nylon 6.6 clip Designed for material thickness of up to 1/2”

	Beam Clamp, Zinc Plated Steel Part Number: TC1015 Includes nylon 6.6 cable clip Zinc plated steel beam clamp with cable clip Designed for material thickness up to 7/8”

	L-Bracket Part Number: TC1016 Steel bracket for mounting detection cable to equipment

	1/16” Cable Tray Mounting Clip Assembly Part Number: TC1021 Designed for material thickness 1/16” to 5/32” Includes nylon 6.6 cable clip 5/32” Cable Tray Mounting Clip Assembly Part Number: TC1022 Designed for material thickness 5/32” to 1/4” Includes nylon 6.6 cable clip

	1/8” Universal Mounting Clip Assembly Part Number: TC1023 Includes nylon 6.6 clip Designed for material thickness of 1/8” to 1/4” 5/16” Universal Mounting Clip Assembly Part Number: TC1024 Includes nylon 6.6 clip Designed for material thickness of 5/16” to 1/2”

	Cable Strain Relief Connector Part Number: TC100 Use with J-Box, HDJ-Box, ELR-Box and HDELR-Boxes

Connection Accessories
	J/ELR Box Part Number: TC1000 NEMA 4X moisture proof standard junction box, with screw terminal strip. 4” x 4” x 2” TC Junction and ELR Boxes - Standard - Cut Sheet.pdf

	HDJ/ELR Box Part Number: TC1002 NEMA 4X moisture proof heavy duty junction box, with screw terminal strip. 6” x 6” x 4” TC Junction and ELR Boxes - Heavy Duty - Cut Sheet.pdf

Splicing Accessories
	Splicing Block Part Number: TC1005 Two point with screw terminals

	Low Temp. Splicing Tape Part Number: TC1010 Black

	Splicing Tape White - Part Number: TC1007 Red - Part Number: TC1008 Blue - Part Number: TC1009

	Sealant Tape Part Number: TC1006 For weatherproof splices

Optional Accessories
	Instrinsic Safety Barrier Part Number: TC4406 Suitable for use in Class I, II, or III Division 1, Gas Groups A-G hazardous areas when installed with an FM approved or UL listed intrinsic safety barrier and meets all appropriate local and national codes. TC Intrinsic Safety Barrier Cut Sheet.pdf

	Test Switch Test Switches are placed at the end of a ThermoCable run and are to be used for commissioning, system inspections, and testing of the system. Please refer to the Test Switch Cut Sheet for more detail. TC Test Switch Cut Sheet.pdf